Instructions for garden fountain for a wonderful garden water feature
We will help you build an urn garden fountain by yourself – here comes the guide. Create a paradise in your backyard with these ideas.
Advertising
Before you start to work, you prepare the ground – consider where you want to put down the switching box. You can arrange your new garden fountain surrounded by plants and flowers. A stone path can lead to this cozy area, and a cozy seating bench or other garden furniture will make a nice outdoor place. You may be able to build a stone floor for the fountain /a ceramic vessel full of water weighs quite a bit and can tip over if the ground is unstable/. For this fountain you will need the following materials – a ceramic vessel with dimensions of at least 20cm high and diameter of at least 15cm, well pump / we recommend using solar panels – in this way you are more flexible, and can also build a deep well in the garden. In addition, this option is more environmentally friendly. If you buy the pump, ask the store, what security measures you need to take.
Drill a hole in the bottom for the cable of the pump and set the pump back into the ceramic vessel. Isolate the hole for the cables with silicone. Connect the water nozzle to the pump. The water nozzle should be about 5 cm higher than the ceramic vessel. Fill the container with water and turn on the pump. Pumps with solar panels need some time to load before beginnings to work. Ready! Now you have built a fountain for your garden and created your own haven of peace, so enjoy this. Have fun!
Advertising
